DIY coffee table (80+ photos)

A coffee table cannot be called essential furniture, however, it does not occupy the last place in the arrangement of a living room or bedroom. Modern tables are endowed with a mass of functions, representing a storage system not only for the press, but also for other useful gizmos. Many models are equipped with spacious drawers and compartments, a transforming system, turning into a large dining table. In addition, the coffee table acts as an important element of decor, which successfully complements the stylish design. It’s quite possible to make such a thing with your own hands, if you share a bit of imagination and patience, and our article will provide interesting ideas for home designing a coffee table.

In the manufacture of modern coffee tables, a wide variety of materials are used. Unlike in the past, when standard rectangular constructions made of MDF were stamped, today's models amaze with their diversity. One of the expensive options are wooden tables made of natural wood. Such a little thing will decorate any interior, it will always look elegant and respectable. Designs come in a wide variety - from simple, rough, Scandinavian-style tables to classic ones decorated with forged or carved decorations.

Since wood is quite expensive, chipboard and MDF boards help to replace it. If we talk about durability, they, of course, are inferior to wooden ones, but they look no worse. To compensate for the simplicity of the material allows design tricks, for example, transforming worktops, built-in sockets, etc.

Metal also takes part in the design of coffee tables. Frames are formed from metal pipes, then supplemented with countertops from other materials. Elegant curls of forged elements with glass countertops look very beautiful. Sometimes you can find design developments in which the table is entirely made of metal.

In modern furniture production, it is increasingly possible to meet glass interior items that bring a certain lightness, airiness to the atmosphere. Products are made of heavy-duty tempered glass that is resistant to all kinds of influences, so you can not be afraid that such an interior item will break or deform under the influence of high temperatures. In some models, glass is designed only on the surface of the countertop.

Plastic is used much less often, since it does not differ in high strength, but has a large color palette and low cost. Most often, it is found as components of a wooden or metal structure.

In home-made original coffee tables, the choice of material is significantly increased, since, in addition to traditional materials, various improvised tools are used.

For the manufacture of coffee tables with their own hands, plywood is most often used, which is relatively inexpensive and easy to process. You can also use various improvised materials and build the most bizarre designs. More complex details, such as curly handles, legs, wheels, accessories and other decorative elements, can be purchased at a furniture store.

Making such an original coffee table does not require much time, but the product will take its rightful place in any interior with notes of minimalism.To work, you need to purchase a sheet of plywood, three legs with mounts, a thick thread, a pencil, a centimeter, a jigsaw and paint (preferably white or black).

So, the first thing you need to do is cut the countertop. On the back of the sheet, select the point that will be the center, drive a small carnation. Cut a piece of thread the length of the radius of the future table. We fasten one end to a clogged clove, and we attach a pencil to the other and, pulling the structure, draw a round shape of the countertop. Then you can dream up and give the canvas a more original shape. It is noteworthy that for the manufacture of such a table, drawings and measurements will not be needed at all. The cutout figure of the tabletop is cut out with a jigsaw, grinded and painted. When the structure is completely dry - fasten the legs. The table is ready.

This original design perfectly fits into many style designs. Most successfully, it will complement a daring loft or a natural eco-style. Designing such an exclusive table is not difficult: to work, you need to get a pallet, metal legs or wheels (at your discretion). Also, you can not do without screws and a screwdriver, saw, paint or varnish with a brush.

Step by step, all work on the design of the table will take place in the following order:

1. We designate the size of the table on the pallet and saw off the excess part.
2. From the residues we take the planks and cover them with gaps in the main structure, so that a solid surface is obtained, we fix it with self-tapping screws.
3. Turn over and arrange five cross bars: two from the sides (legs will be attached to them) and one in the center for stability.
4. We mount the supports and open the structure with varnish or paint.

An old worn tire can be a good basis for creating a great home coffee table. Additionally, you need to prepare plywood. Before proceeding with the design, it is necessary to thoroughly wash and dry the tire. Next, you need to measure the diameter of the tire and cut two circles from plywood: one - the countertop - must correspond to the diameter of the tire, and the other - the base - be several centimeters smaller. To the base, you can immediately attach the legs, wheels or leave without support at your discretion. We fasten the round sheets of plywood to the tire with the help of self-tapping screws or we sit on building glue - the base is ready.

Next, we choose one of two ways: we wrap with a rope either the entire structure completely, or only the sides. In the first option, you need to think about how to process the countertop - perhaps paint or cover with shiny varnish.

Winding should start from the center: we fix the end of the rope with a self-tapping screw or glue gun and begin the movement with winding circles, gradually moving to the sides. There is no point in wrapping it up, unless you decide to make the table half two-tone. At the end of the winding, the entire structure should be covered with transparent varnish to extend the service life.

If your farm was littered with wooden boxes of vegetables - do not rush to throw them away. Only four of these containers can turn into a beautiful and useful part of the living room interior. If you do not have drawers, the most difficult part in making the table will be to get them. Then everything is simple: the boxes need to be sanded, painted and folded, as shown in the photo. We use a sheet of plywood, which must be screwed on the underside of the structure so that it does not fall apart. So our coffee table is ready. The advantage of this design will be the organization of spacious storage spaces for various magazines, books and other gizmos.

Nowadays, travel to different countries has become available to many. But there is a special category of people who simply cannot live without constant trips to distant corners.They will surely like a coffee table reminiscent of certain pleasant voyages. For manufacturing, any old suitcase with hard walls is suitable, not suitable for use for its intended purpose. You will also need a sheet of thick plywood, a screwdriver with screws, paints and, if desired, legs or wheels.

From plywood we cut two sheets with an area equal to the base of the suitcase, we fasten them from the inside to the base and the lid. We fasten the legs or wheels. Next, you need to decorate the table - for this, different methods are used. One of the simple options is to paint it white, and when the structure dries, use abrasive paper to make scuffs that indicate the antiquity of the item. Such a product will adorn the living room in the style of shabby chic. The black color of such a table will harmoniously fit into the loft living room, and decoupage decoration will become a real masterpiece of Provencal design.

The uniqueness of furniture made of stumps and snags lies in its uniqueness - what is created by nature itself does not have similar patterns and textures. Such products always attract the eye with their bends and weaves. In addition, it is not so difficult to get the source material - it can be found in the forest, on the shore of the reservoir. The snag must be washed, cleaned of bark, and remove rotten bends. Next, you need to adjust, align the shape under the countertop and base and allow the workpiece to dry thoroughly (if there are large holes in the wood, it can be puttied).

The dried driftwood is carefully ground, covered with a stain (you can choose the most liked shade) and varnish. The foundation is ready. The tabletop can be attached with construction glue or self-tapping screws (depending on what it is made of). Glass tops are very popular now, through which the winding wooden branches are clearly visible.

We examined only some of the options for making coffee tables with our own hands. Much more information and photos of finished products will provide our gallery, in which you can get a lot of interesting ideas. Enjoy watching!